Area Sensor

• Slim design with 13mm thickness
• Minimum detectable object Ø30mm
• Synchronization function

The SG 10 light curtain system consists of a self-contained transmitter detector, SGT and receiver detector, SGR, which are to be positioned opposite of each other. The detectors are housed in an aluminium profile available in a weatherresistant, slim line design (12 x 30 mm).

The advanced automatic signal-tracking (AST) feature ensures that no onsite set up or adjustments are required. The signal level of each individual channel is adjusted automatically, compensating for misalignment and contamination during operation.

Description

• 3-10 metre sensing range
• 34 to 194 cross scanning beams
• Active height of 650 mm or 1800 mm
• Detector length of 850 mm to 2000 mm
• Cable connection
• Automatic sensitivity adjustment
• Slim line (12 x 30 mm) detector housing
• Power, output and signal status indicators
• 12 – 36 V dc supply voltage
• 5 wire, NPN/PNP opto isolated output
• Test input

The SG 1 light curtain system consists of a self-contained transmitter detector, SGT and receiver detector, SGR, which are to be positioned opposite of each other. The detectors are housed in an aluminium profile available in a slim line design (10 x 28 mm) and a leading edge design (37,5 x 13 mm).

Description

• 0-4 meter sensing range
• Multiple cross scanning beams
• Flexible cable connection
• Automatic sensitivity adjustment
• Slim line housing
• Power, output & signal status indicators
• 12- 36Vdc supply voltage
• Built- in controller
• NPN or PNP or opto-isolated relay output
• Test input
• Time-out function via wire connection

The SG 14 light curtain system consists of a self-contained transmitter detector, SGT and receiver detector, SGR, which are to be positioned opposite of each other. The detectors are housed in a weather resistant, aluminium profile available in a slim line design (12 x 30 mm).

The SG 14 series features the Dynamic Blanking Function which allows the detectors to be positioned in the guide tracks of an industrial door, where the door travels directly in front of the protection area, interrupting the beams sequentially from top to bottom.

The special feature ensures that the system can distinguish between the closing door and an object by ignoring the beams that are interrupted by the moving door whilst leaving the remaining beams active to detect an object in the protection area.

Description

• 1-10 metre sensing range
• 16 to 56 parallel beams
• Active height of 695 mm to 2535 mm
• Detector length of 850 mm to 2800 mm
• Cable or plug connection
• Automatic sensitivity adjustment
• Weather resistant, slim line (12 x 30 mm)
• Detector housing
• Power, output and signal status indicators
• 12 – 36 V dc supply voltage
• Dynamic blanking function
• 5 wire, solid state relay output
• Test input