Sort By:
|
URG-04LX - Compact Laser Range Finder- Wide scanning range with 4m and 240°.
- High accuracy ±1%, angular resolution 0.36°.
- Compact design, light weight, low power consumption.
- It is possible to output the serial data directly.
| |
URG-04LX-UG01 - Compact Laser Range Finder- Able to run on USB power.
- Light weight (160g). Best for robot!
- Low-power consumption (2.5W) for longer working hours.
- Accuracy (±30mm).
| |
UBG-04LX-F01 - High Speed Laser Range Finder (Rapid URG)- Scanning speed is 4 times faster than URG-04LX, providing better performance for autonomous robots.
- 28msec scanning speed.
- High accuracy, high resolution and wide angle.
| |
UTM-30LX - Long Distance Laser Range Finder- Long distance scanning (30m).
- Available for outdoor use because of 100,000lux for ambient illuminance and IP64 for protective structure.
- High-speed response, 25msec.
- 12VDC.
| |
UTM-30LX-EW - Laser Range Finder- Ethernet Interface.
- Multi-Echo detection for outdoor use.
- Detectable in snowy, rainy, foggy and dusty conditions.
- IP67 protective structure.
| |
UXM-30LX-EW - Laser Range Finder- Ethernet Interface.
- Multi-Echo detection for outdoor use.
- Detectable in snowy, rainy, foggy and dusty conditions.
- IP67 protective structure.
| |
PBS-03JN - Obstacle Detection Sensor- Compact size and detects up to 3meter (scanning angle 180°).
- Used in Automated Guided Vehicle (AGV).
- 3 detection areas can be set by PC(RS-232C).
- Changeover for Max. 15 kinds of detection area.
| |
UBG-05LN - High Accuracy Obstacle Detection SensorUBG-05LN is an obstacle detection sensor with 785nm wave- length laser light source. It detects objects in the predefined area by scanning 180°semicircle and calculates the coordi- nates of the detected object by measuring its distance and angle. - Used in Automated Guided Vehicle (AGV).
- Realtime data of scanning area can be displayed on PC with RS-232C.
- 31 different area patterns and their coordinate points can be set using application software and serial communication RS-232C. 3-step outputs can be selected for each area.
| |
|