Products Search

  

Automatic Grease Dispenser

Pulsarlube C - Automatic Single Point Lubricator

Manufacturer: Pulsarlube

The Pulsarlube C operates upon the principle of the generation of an inert Nitrogen (N2) gas produced by an intermittent electrical charge via a microprocessor to an electrolyte. This electro-chemical reaction allows the Pulsarlube C to dispense with very high accuracy and reliability. For added security, a Red LED blinks every 10 seconds to verify the lubricator is functioning properly. The flashing red LED feature comes in handy when checking if the lubricator is functioning properly for example at a distance in dark areas. Below are additional benefits of the Pulsarlube C.

Pulsarlube C

Pulsarlube V - Automatic Single Point Lubricator

Manufacturer: Pulsarlube

The Pulsarlube V's pro-logic microprocessor chip control allows for programming of the unit to be as simple as pressing a single button. The Pulsarlube V operates on the principle of inert Nitrogen (N2) gas generation through the use of an electrolyte and electrical energy. Pressure is generated intermittently above the piston which delivers a fresh and precise amount of lubricant to your critical rotating equipment. The Pulsarlube V is also certified for "intrinsic safety" Ex ia IIC T4 for use in hazardous areas.

Pulsarlube V

Pulsarlube M - Automatic Single Point Lubricator

Manufacturer: Pulsarlube

The innovative Pulsarlube M is designed to ensure reliable lubrication and at the same time cut lubrication costs with an advanced computerized control system. It consists of a vertical feed pump, motor/gear set, and microprocessor allowing operating pressure of 30kgf/㎠ (425psi). It is ideal for hard to reach/hazardous locations via its remote installation capability. Below are additional outstanding benefits of the Pulsarlube M.

Pulsarlube M

Pulsarlube EX - Automatic Single Point Lubricator

Manufacturer: Pulsarlube

The Pulsarlube EX is a Class I, Division 2, Group C, D certified, battery operated, single point lubricator with a powerful positive displacement pump engineered to reliably lubricate your equipment. The Pulsarlube EX is specially designed with a modified enclosure rated for limited hazardous locations Class I, Div. II, Sec. C, D.

Pulsarlube EX

Pulsarlube MS - Automatic Single Point Lubricator

Manufacturer: Pulsarlube

The Pulsarlube MS is engineered to operate in synchronization with the equipment on which it is installed. The MS unit will dispense the preset amount of grease as long as the machine is operating. If the equipment is not on, then the Pulsarlube MS unit goes into "stand-bymode" and does not dispense lubricant until the machine goes back into operation. The Pulsarlube MS can prevent any waste of lubricant as well as damage or loss to your equipment resulting from over-lubrication.

Pulsarlube MS

Pulsarlube MSP - Automatic Single Point Lubricator

Manufacturer: Pulsarlube

The Pulsarlube MSP unit offers the advantage of providing automatic lubrication to machinery that is infrequently or intermittently used by synchronizing itself to the equipment, thereby avoiding the problem of over lubrication. The Pulsarlube MSP will dispense a preset amount of grease as long as the machine is operating and does not dispense lubricant if the equipment stops. The unit goes into "stand-by-mode" until the machine goes back into operation. The MSP lubricator can be externally powered by the machine or the PLC. There is no need to replace the battery pack in the MSP for up to 5 years.

Pulsarlube MSP

Pulsarlube ML500 - Automatic Single Point Lubricator

Manufacturer: Pulsarlube

The Pulsarlube ML500 is primarily designed to ensure reliable lubrication of larger bearings (i.e. >102 mm = 4" O.D.) commonly found in industries such as mining, cement, and steel. The lubricant is supplied in 500cc volumes per grease pack, which is replaceable along with a Pulsarlube battery pack. The ML500 offers 8 optional dispensing rates from Half (H) to 24 months. The ML500 gives you double the value with its increased grease volume capacity and double the programmable time, ultimately increasing your equipment's uptime and your bottom line.

Pulsarlube ML500

Pulsarlube OL500 - Automatic Single Point Lubricator

Manufacturer: Pulsarlube

The Pulsarlube OL500 is our latest innovation in oil lubrication specifically designed to deliver a fresh, consistent, and precise amount of oil to all of the vital parts of your rotating equipment. The precise and reliable lubrication of the Pulsarlube OL500 significantly reduces wear, oil consumption, and also extends the service life of your machinery; thus cutting high maintenance costs in half. The OL500 is easily refillable.

Pulsarlube OL500
Page 1 of 2Next